Vibro Lag Tape
Key Specifications
The information provided serves only as a general summary and overview of topics of interest.
Product Details
The information provided serves only as a general summary and overview of topics of interest. VIBRO Isolation Limited., accepts no responsibility for any incidental or consequential damages, whether direct or indirect, nor for losses arising from failure to follow applicable industry/product standards or from the improper use of VIBRO products. As construction practices may vary, any situations not specifically addressed should be referred to VIBRO Isolation Limited for evaluation. To ensure suitability for actual site conditions, certified testing is strongly recommended. It is recommended to seek further advice on your application with our technical staff prior to use.
- 3-way Foil-Scrim-Kra¬ backing provides excellent re ection of both heat and light.
- High quality adhesive with super strong adhesion and holding power o ers reliable and
durable Foil Scrim-Kra¬ Facing joints and seams sealing in HVAC ductwork application.
- Low moisture vapor transmission rate makes Asmaco Tape an excellent vapor barrier.
- Service Temperature range from -20 ~ +80 °C (-4 ~ +176 °F)
Product Use
It is essential that the user evaluate the VIBRALAG FSK Tape product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on Asmaco Tape product between +10 ~ +40°C (+50 ~ +105 °F).
PROPERTIES | METRIC | TEST METHOD |
Backing Thickness | 120 Micron | PSTC-133 / ASTM D 3652 |
Total Thickness | 170 Micron | PSTC-133 / ASTM D 3652 |
Adhesion to Steel | 25 N/25mm | PSTC-101 / ASTM D 3330 |
Tack Rolling Balll | 20 cm | PSTC-6 / ASTM D 3121 |
Tensile Strength | 120 N/25mm | PSTC-131 / ASTM D 3759 |
Ellongation | 1.2% | PSTC-131 / ATM D 3759 |
Service Temperature | -20 ~ +80 oC |
|
Applying Temperature | +10 ~40 oC |
|
Related Products
It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout.
It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout.